Psst..!
We are open again! PartsRepublik has been taken over as of May 22, 2024. All questions, orders and warranty cases will from now on be handled by Goedhart Motoren B.V.
aprilia, AP292026 crankshaft assy., stroke 61 mm (2,4 in.), AP227755 spacer ring 30,9/50/0,75 magnetseitig magneto, AP944582 shim 30,4/40,5/0,3 magneto side, AP944586 shim 30,4/40,5/0,2 magneto side, AP944583 shim 30,4/40,5/0,1 magneto side, AP932588 ball bearing 6206 tnhc4 30-62-16 magneto side, AP246011 woodruff key 3x5 magneto side, AP945757 lock washer 18, AP942225 hex. nut m18x1,5 tightening torque 100 nm, AP232750 ball bearing 3205 c3/ 25-52-20,6 clutch side, AP246570 woodruff key 4x5 clutch side, AP247290 disk valve spacer, AP224102 rotary valve 128 degr.,, AP292133 drive gear w. clutch drum assy. replace only drive gear with clutch drum as, AP242615 hex. nut m18x1,5 tightening torque 80 nm (710 in.lb.), AP932904 needle cage 18x22x22, AP293900 piston assy. 75,98/75,99 mm with 2 rings, standard, AP915215 rectangular ring 76 mm standard, AP915820 semi trapez ring 76,0 mm standard, AP916135 piston pin 18x12x53,7, AP945735 circlip 18 seger use only once, AP230552 gasket, AP223540 cylinder aluminium painted, standard red 76,00 - 77 standard green 76,01 - 7 7, AP224090 tube, AP841320 stud m8x35/2d tightening torque 8 nm (70 in lb.), AP250510 o-ring 87-2, AP831765 o-ring 135-2,5, AP223550 cylinder head aluminium painted, AP842471 cap nut m8 tightening torque 22 nm (195 in.lb.), AP830270 gasket, AP945752 lock washer a8, AP240081 allen screw m8x25 tightening torque 25 nm (220 in.lb.), AP292024 crankshaft repair kit, AP297431 loctite anti-seize 10 gr., to prevent metal galling, AP899788 loctite 648 green 5 gr., high strength bond, AP899785 loctite 221 violett, 10 ccm., low strength bond

All parts for the 734apriliaclimber1990tm1_12 of the Aprilia Climber 280 1990

Here you can find all the spareparts that belong on the 734apriliaclimber1990tm1_12 of your Aprilia Climber 280 1990.

All parts for the 734apriliaclimber1990tm1_12 of the Aprilia Climber 280 1990
< Scroll to zoom >
#
Article
Description
Price

Servicing your Aprilia Climber 280?

Then you have come to the right place at partsrepublik! We have a wide range of products for your Aprilia Climber 280, to be able to carry out the maintenance on your Aprilia Climber 280 as well as possible. With a well-maintained motorcycle you will go on a tour faster than with a motorcycle that you are not sure of, or that can complete the ride. By performing the correct maintenance on your motorcycle, you can be sure that you can always go on the road carefree! We also have an extensive range of accessories. We have listed a number of relevant product groups for you;

Curious about all products and accessories? View them by clicking the button below. There you will find a complete overview of relevant articles for your Aprilia Climber 280.


Find the parts while repairing your Aprilia!

The technical drawing shows all original parts for the 734apriliaclimber1990tm1_12 of the Aprilia Climber 280 1990. By clicking in the list you go directly to the articles belonging to the reference number. These items can be original Aprilia items, but they can also be replacement aftermarket items, which are suitable for the 734apriliaclimber1990tm1_12. These articles of course also fit on the Aprilia Climber 280 1990, but serve as a cheaper alternative than the original parts of Aprilia.

About PartsRepublik

Read all reviews (1612)

Shipment from the Netherlands

Response within 24 hours!

Want to cancel your order? We will arrange it without any problems!

E-mail: info@partsrepublik.com